The OTG is needed to convert the micro-USB connector on the board to a full ... An SD card was created and edited on a Raspberry Pi B 2 to set the WiFi credentials. Inserted into the Zero it ...

Just in case of any wifi/config issue. (also make sure that the ESP8266 ... and the pc-side of the cable to the USB connection on the Arduino Pro Micro. Since I had very little space inside the ...

Connect 5 volts from the micro usb breakout board to the 5 volt pin on the ESP module. Connect Ground from the micro usb breakout board to the Ground on the ESP module. Connect 5 volts from the usb ...

Morse Micro MM8108 is a new WiFi HaLow (802.11ah) SoC with a throughput of up to ... in a BGA package instead of 6x6mm in a QFN48 package for the MM6108/MM6104, adds a USB 2.0 host interface besides ...