/Watchdog_for_RaspberryPi |-- /ATTiny | |-- WDtimer.c .c source file | |-- WDtimer.h .h source file | |-- /Hardware | |-- Watch_dog_for_RPi_BP_Rev2.pdf Circuit ...

A similar version of this article appeared in the April 2007 issue of Power Electronics Technology magazine. Most watchdog-timer ICs produce a single, limited-duration output pulse when the watchdog ...

A clock circuit that keeps counting from a set number down to zero. If the event it is monitoring occurs before it reaches zero, it resets to the starting number and starts counting down again.

This project introduces a standalone watchdog timer for use with any device featuring one availabe serial port (RS-232), and having the capability of periodically sending a specific string of data ...

A watchdog is used in systems to prevent system lockup due to software or hardware failures. For normal operation, the timeout counter has to be reset by the CPU in a regular interval. Depending on ...

I want to use watchdog timer interrupt in C6748 LCDK. Please provide me code for that. The starterware of C6748 LCDK contains examples for watchdog timer. You can ...

The main purpose of the Watchdog IP Core is to trigger a system reset in case of software failure to prevent a system lock-up. Via a 32-bit APB interface, the host processor can choose the timeout ...

I made a lot of tests with the watchdog on my LP-AM263x. Can someone explain my why I have to clear the watchdog timer in one-tenth of the "WDT Expiry Time" set in SysConfig? As an example when I set ...

or by enabling the watchdog timer window (WDTW). The third step to use the WDT in low-power or sleep modes is to wake up the device when needed. You can use the WDT as a wake-up source ...