1. Parts needed; You will need to gather your parts and doner bikes. I used two 16" girls frame bikes, a 20" front fork, a 16" rear...

2. Remove all parts. Cut off the head tubes with leads of about 3 inches. You will need to turn the headtubes up side down for use. Remove bearing...

3. You will be useing a handle bar stem for a seat post. I used the stem from a MTB and one of the longest they issue. Cut and reform to your needs...

4. Choose your forks. Not just any fork will work for you. Be sure it is what you need, that it fits the headtubes you just cut off. Fork for rear...

5. Building your rear fork / frame. This is where some of that hard skill comes in. Grind away your cut offs to smooth surface. Match your rear for...

6. Removing fork stays ( If ) this is the type of fork you are useing. Place in a vice, heat well, Pry, twist , remove........ Click on any image f...

7. Building your Locking plate and pin. This is where some of that hard skill comes in. I used 3/16 x 1" flat bar. 3" x 1/4" bolt an...

8. Create your front fork Fender / Brake stay. Also the hook plate for the springs and The front grab bar for the hook plate. The fender stay was w...

9. Don't you just hate sanding ? Well, I know I do. Here is an easy how to. Heat the frame / paint with a pluming tourch and wire brush it off...

10. I sure hope I've been a big help ?  I hope I have not missed any steps ? Be sure to post a Comment or ask Questions ? I'll do my best to a...